![Software Software](https://s3.amazonaws.com/wb_public/2012/12/large/graphtec_007.515ae4046fab6.jpg)
Item | CE7000-40 | CE7000-60 | CE7000-130 | CE7000-160 (Not available in US & Korea) |
---|---|---|---|---|
Configuration | Grit rolling type | |||
Drive method | Digital servo drive | |||
Max. cutting area (W x L) (*1) | 375mm × 50m | 603mm × 50m | 1270mm × 50m | 1524mm × 50m |
Cutting area of guaranteed accuracy (*1) (When using optional basket) | 355mm × 2m | 583mm × 2m (583mm × 5m) | 1250mm × 2m (1250mm × 5m) | 1504mm × 2m (1504mm × 5m) |
Mountable media width | Min. | 50mm | ||
Max. | 484mm (19inch) | 712mm (28inch) | 1372mm (54inch) | 1626mm (64inch) |
Mountable roll media mass | 5 kg | 9 kg | 17 kg | 20 kg |
Number of push rollers | 2 rollers | 4 rollers (Max. 5 (option)) | ||
Max. cutting speed | 600mm/s at all direction | 900mm/s at 45° direction | 1000mm/s at 45° direction | |
Acceleration | 21.2m/s2 at 45° direction | 13.9m/s2 at 45° direction | ||
Cutting force | Max. 4.41N (450gf) | |||
Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) | |||
Mechanical resolution | 0.005mm | |||
Programmable resolution | GP-GL:0.1/0.05/0.025/0.01mm HP-GL™ (*2):0.025mm | |||
Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) | |||
Mountable number of tools | 1 tool | |||
Blade types | Supersteel | |||
Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen | |||
Media types | Up to 0.25mm thickness Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) | |||
Interface | USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX | |||
Buffer memory | 2MB | |||
Command sets | GP-GL / HP-GL™ (Set by command or auto-detect) (*2) | |||
Display | Graphic type LCD with back-light (240dots x 128dots), supports 10 languages | |||
Power source | 100V to 240V AC, 200V to 240V AC, 50 / 60 Hz | |||
Power consumption | Up to 100W | |||
Operating environment | 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) | |||
Guaranteed accuracy environment | 16 to 32 ºC, 35 to 70 % R.H. (non-condensing) | |||
External dimensions (approx. W x D x H) (with basket) | 772x292x313 mm | 1005×582×1092 mm (1005×936×1092 mm)(*3) | 1704×811×1215 mm (1704×1148×1215 mm)(*3) | 1916×811×1215 mm (1916×1148×1215 mm)(*3) |
Weight (approx.) (with basket) | 13kg | 23kg (25.2kg)(*3) | 51kg (54.9kg)(*3) | 55kg (59.5kg)(*3) |
Compatible OS (*4) | Windows 10/8.1/7 Mac OS X 10.6 ~ 10.11 / macOS 10.12 ~ 10.15 (Graphtec Studio: 10.6 - 10.15, Cutting Master 4: 10.7 - 10.15) | |||
Supported software | Graphtec Pro Studio(Windows)(*5), Graphtec Studio(Mac), Cutting Master 4(*5), Windows Driver |
Dec 11, 2018 You'll need a USB to serial adapter - this will give you a serial port. Then you'll also need a Graphtec 9 pint to 25 pin serial cable. With serial port connections, you don't need a driver for the plotter, you just need to know the correct serial port settings - and they need to match on the plotter, in the OS and in the software.
Graphtec Cutting Pro Fc7000 75 Printing Software For Mac Download
- Viii Safety Precautions WARNING Do not touch the rollers or moving parts such as the carriage while cutting or plotting is in progress. Such action may result in injury.
- Vinyl Cutter Download Graphtec FC7000 Series, Vinyl Cutter Machine Download Graphtec FC7000 Series, Vinyl Cutting Machine Download Graphtec FC7000 Series, Vinyl.
- (*1)
- Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used.
- (*2)
- HP-GLTM is a registered trademark of Hewlett-Packard Company.
- (*3)
- When equipped with the stand.
- (*4)
- Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
- (*5)
- It requires an Internet connection in order for activation or registration when starting the software for the first time.
GRAPHTEC STUDIO
This is an easy-to-use application software for creating original designs. It has enhanced features such as auto-shapes, shading, and editing functions. It can also configure the cutting conditions and other functions on the plotter.
Main features of Graphtec STUDIO
Line style
Doodle god for pc. It can set configuration of line intuitively to plot such as style, corner, end cap, and position.
Editing function
It can be edited using the functions such as the crop, the join, and etc in each of shapes on the overlapping objects.
Auto-shapes
![Cutting Cutting](https://images.squarespace-cdn.com/content/v1/5900b1a3c534a5aa8149a65c/1593033726521-EXX3HDRIBF50AKDZ26Z6/ke17ZwdGBToddI8pDm48kHvrV04ssC-vDvohxpR3ak8UqsxRUqqbr1mOJYKfIPR7LoDQ9mXPOjoJoqy81S2I8N_N4V1vUb5AoIIIbLZhVYy7Mythp_T-mtop-vrsUOmeInPi9iDjx9w8K4ZfjXt2dlPPY4T7BPzT1KyeMCD_bXVL7UO-6dWMU49BD3RGqnYipC969RuPXvt2ZwyzUXQf7Q/optimahome.jpg?format=1500w)
Item | CE7000-40 | CE7000-60 | CE7000-130 | CE7000-160 (Not available in US & Korea) |
---|---|---|---|---|
Configuration | Grit rolling type | |||
Drive method | Digital servo drive | |||
Max. cutting area (W x L) (*1) | 375mm × 50m | 603mm × 50m | 1270mm × 50m | 1524mm × 50m |
Cutting area of guaranteed accuracy (*1) (When using optional basket) | 355mm × 2m | 583mm × 2m (583mm × 5m) | 1250mm × 2m (1250mm × 5m) | 1504mm × 2m (1504mm × 5m) |
Mountable media width | Min. | 50mm | ||
Max. | 484mm (19inch) | 712mm (28inch) | 1372mm (54inch) | 1626mm (64inch) |
Mountable roll media mass | 5 kg | 9 kg | 17 kg | 20 kg |
Number of push rollers | 2 rollers | 4 rollers (Max. 5 (option)) | ||
Max. cutting speed | 600mm/s at all direction | 900mm/s at 45° direction | 1000mm/s at 45° direction | |
Acceleration | 21.2m/s2 at 45° direction | 13.9m/s2 at 45° direction | ||
Cutting force | Max. 4.41N (450gf) | |||
Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) | |||
Mechanical resolution | 0.005mm | |||
Programmable resolution | GP-GL:0.1/0.05/0.025/0.01mm HP-GL™ (*2):0.025mm | |||
Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) | |||
Mountable number of tools | 1 tool | |||
Blade types | Supersteel | |||
Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen | |||
Media types | Up to 0.25mm thickness Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) | |||
Interface | USB 2.0 (Full Speed), Ethernet 10BASE-T/100BASE-TX | |||
Buffer memory | 2MB | |||
Command sets | GP-GL / HP-GL™ (Set by command or auto-detect) (*2) | |||
Display | Graphic type LCD with back-light (240dots x 128dots), supports 10 languages | |||
Power source | 100V to 240V AC, 200V to 240V AC, 50 / 60 Hz | |||
Power consumption | Up to 100W | |||
Operating environment | 10 to 35 ºC, 35 to 75 % R.H. (non-condensing) | |||
Guaranteed accuracy environment | 16 to 32 ºC, 35 to 70 % R.H. (non-condensing) | |||
External dimensions (approx. W x D x H) (with basket) | 772x292x313 mm | 1005×582×1092 mm (1005×936×1092 mm)(*3) | 1704×811×1215 mm (1704×1148×1215 mm)(*3) | 1916×811×1215 mm (1916×1148×1215 mm)(*3) |
Weight (approx.) (with basket) | 13kg | 23kg (25.2kg)(*3) | 51kg (54.9kg)(*3) | 55kg (59.5kg)(*3) |
Compatible OS (*4) | Windows 10/8.1/7 Mac OS X 10.6 ~ 10.11 / macOS 10.12 ~ 10.15 (Graphtec Studio: 10.6 - 10.15, Cutting Master 4: 10.7 - 10.15) | |||
Supported software | Graphtec Pro Studio(Windows)(*5), Graphtec Studio(Mac), Cutting Master 4(*5), Windows Driver |
Dec 11, 2018 You'll need a USB to serial adapter - this will give you a serial port. Then you'll also need a Graphtec 9 pint to 25 pin serial cable. With serial port connections, you don't need a driver for the plotter, you just need to know the correct serial port settings - and they need to match on the plotter, in the OS and in the software.
Graphtec Cutting Pro Fc7000 75 Printing Software For Mac Download
- Viii Safety Precautions WARNING Do not touch the rollers or moving parts such as the carriage while cutting or plotting is in progress. Such action may result in injury.
- Vinyl Cutter Download Graphtec FC7000 Series, Vinyl Cutter Machine Download Graphtec FC7000 Series, Vinyl Cutting Machine Download Graphtec FC7000 Series, Vinyl.
- (*1)
- Operated with Graphtec specified cutting condition and media. For long-length cutting, the basket is used.
- (*2)
- HP-GLTM is a registered trademark of Hewlett-Packard Company.
- (*3)
- When equipped with the stand.
- (*4)
- Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
- (*5)
- It requires an Internet connection in order for activation or registration when starting the software for the first time.
GRAPHTEC STUDIO
This is an easy-to-use application software for creating original designs. It has enhanced features such as auto-shapes, shading, and editing functions. It can also configure the cutting conditions and other functions on the plotter.
Main features of Graphtec STUDIO
Line style
Doodle god for pc. It can set configuration of line intuitively to plot such as style, corner, end cap, and position.
Editing function
It can be edited using the functions such as the crop, the join, and etc in each of shapes on the overlapping objects.
Auto-shapes
There are 68 shapes, and also can edit easy it. Half life 2 cinematic mod alyx skins.
Graphtec Cutting Pro Fc7000 75 Printing Software For Mac Computers
Shaded function
It can easily paint colors on a object of the illustration and can also fill in a gradient or pattern.
Plotter settings
Graphtec Cutting Pro Fc7000 75 Printing Software For Mac Os
The cutting condition in the cutting plotter can be monitored and configured from the Graphtec Studio software. It can easily select the cutting plotter for using to the cutting job. Kindle app for mac computer.
Other features
• Editing the text using a tool similar to the word processor function.
• Grouping, in-grouping, and aligning objects.
• Change the shape of the object to create a unique shape by moving, editing, or deleting a anchor-point
• Adding a shadow to an object.
• Deleting parts or elements of an object using eraser tool.
• Editing multiple overlapped object in welding, subtracting, cropping, and dividing.
• Manipulating an object by re-sizing, rotating, and mirroring.
• Easy creating copies of an object with in the matrix condition.
• Easy creating outline or contour line on bitmap object using bitmap tracing function.
• Easy creating the registration marks on an image for the printing & cutting application.
• Filling objects with custom colors, gradations, and patterns.
• Operating unlimited 'undo' and 'redo'.
• Connecting and controlling of multiple plotters.